SMOK RPM80 Pro Pod Starter Kit

The Smok RPM80 Pro Pod Kit is an intermediate pod device ideal for those of you looking to try sub ohm vaping. 

The Smok RPM80 Pro features a maximum power of 80W and gives users the option of RGC Coils which can run up to tremendous wattages and deliver outstanding flavour and cloud production.

It can be used with MTL coils for freebase or salt liquids, or it can be used with DTL coils for anything else like shortfills at up to 80watts for a nice intermediate sub ohm vape.

This device is powered by a single 18650 battery  (sold separately) giving you the freedom to keep your battery charged on the go and swap out as and when you need to!

What's in the Smok RPM80 Pro Pod Kit Box?

• 1 x Smok RPM80 Pro Device

• 1 x Smok RGC Pod (For RGC Coils)

• 1 x Spare Smok RPM Pod (For RPM Coils)

• 1 x 0.17 Ohm RGC Conical Mesh 0.17ohm Coil (for RGC Pod)

• 1 x 0.6ohm Nord Coil (For RPM Pod)

• 1 x USB Lead

• 1 x User Manual

What coil should I use with the Smok RPM 80 Pro Pod Kit Device?

• The RPM80 Pro Pod Kit is compatible with two different pod types and in-turn various coils

• The RPM Pod is handily compatible with all existing RPM coils.

• The RPM80 RGC Pod can be used with the new RGC Conical Mesh 0.17Ω coil.

• The RPM 80 RPM POD uses the Smok RPM Coils which are available in 1.0 Ohm for Mouth to Lung vaping and a similar draw to a cigarette. You would need to set your device to a maximum of 15w

• Or the Smok RPM Coils in 0.4 Ohm for an intermediate sub ohm vaping experience with more clouds, vapor and flavour. When using these coils set your device to a maximum 25W

• The RGC Conical Mesh Coil in 0.17Ohms is a low resistance coil that uses a conical mesh design funneling airflow up through the coil for more intense flavour. Rated at up to 80 watts of power, this coil is capable of serious performance and clouds. For best results set your device between 40W - 80W

What vape juice should I use with the Smok RPM 80 Pro Pod Kit Device?

• If you're using the Smok RPM Coils in 1.0 Ohm rating we recommend using nic salts, why not try our Primal Asalted range 

• For the Smok RPM Coils in 0.4 Ohm  we would recommend any liquid that's at least 60%VG/40%PG. When sub-ohm vaping with lower resistance coils, we would recommend using e-liquids with a nicotine strength no higher than 3mg as the effect of higher nicotine can be a bit harsh on the throat. Why not try a high VG shortfill which can be mixed up to 3mg nicotine strength.

• If you are using the Smok RPM Coils in 0.4Ohm and would still like a higher nicotine strength we would recommend a High VG 10ml Liquid  to avoid the device leaking. These are available in higher nicotine strengths, but please note that these may be quite strong when sub-ohm vaping. 

• For RGC Conical Mesh Coil in 0.17Ohms we would simply recommend a high VG shortfill why not try our Primal shortfill range?

Smok RPM80 Pro Pod Kit Key Features:

• Battery Capacity: One single 18650 battery   (Sold Separately) 

• E-Juice Capacity: 2ml

• Firing Time: 0.001S

• Output Wattage: 1W-80W

• Output Mode: Watt

• Resistance Range: 0.2ohm - 2.5ohm

Smok RPM 80 Pro Pod Kit Specifications and Dimensions:

• Dimensions: 118 x 26 x 31.5 mm

• Weight: 125g

• Output power: 1-80 watts

• Adjustable airflow

• Resistance range: 0.15-3.00Ω

• Battery compatibility: 18650

• Stand by current: <100uA

• Output voltage: 0.5V-4.0V

• Input voltage: 3.3V-4.2V

• Charging voltage: 5V

• Charger output: 5V/2A

• Over discharge voltage: 2.4V

• Charging current: 1.2A (Max)

• Overcharge voltage: 4.3V

• E-liquid capacity: 2ml

Are there any safety protections for the RPM 80 Pro Pod Kit?

• Intelligent atomiser recognition

• Puff monitoring system

• 8 seconds cut-off

• Short circuit protection

• Overheating protection

• Low battery warning

How to change the wattage of the Smok RPM80 Pro Pod Kit Device:

• The maximum output power is 80W, which is powered by 1 x 18650 external batteries (sold separately)

• You can adjust the required power within the range of 1W-80w by pressing the UP/DOWN buttons on the front of the device under the digital screen to get the preferred effect

How do I know when my Smok RPM80 Pro Kit is Charged?

• You will be able to see the current battery levels of your RPM80 Pro Kit on the digital Full Colour Display screen on the front of the device. 

How do I fill the pod of the Smok RPM80 Pro Pod Kit Device? 

• This is a top filling pod device so there is no need to remove the pod to fill with e-liquid

• Pull out the rubber plug on the slot and add e-liquid through the slot

• Press the rubber plug back carefully and firmly